User guide

Helpline 0844 800 6503 (See page 114 for costs and hours of operation)
110
USE ON A PRIVATE BRANCH EXCHANGE
Use on a private branch exchange
If your phone’s on an exchange (e.g. you need to dial 9 to get an outside line),
you can transfer calls and use call back by using the R button. You’ll need to
check your private exchange manual to nd out which timing to use for your ex-
change. You can choose two recall timings: 100ms (Short) and 300ms (Long).
You have a choice of two dialling modes: tone and pulse. The default setting is
TONE and this is the correct setting for use within Europe.
To set the recall time on the corded phone
1. Press to open the menu, scroll using or until you highlight
Settings and press .
2. Scroll using or until you highlight Recall and press .
3. You’ll see the current recall timing setting (e.g. Short).
4. Choose the recall timing setting you want (Short or Long) using or
and press .
To set the recall time on the cordless handset
1. Open your menu by pressing , then scroll using or until you
highlight Base settings and press .
2. Scroll using or until you highlight Recall and press .