User guide

Helpline 0844 800 6503 (See page 114 for costs and hours of operation)

At the wrist shaker:

1. Turn on the wrist shaker by pressing and holding the button for about-

five seconds.

2. Press and hold the button again for about 12 seconds, until the registra-

tion light flashes green quickly. The wrist shaker will be in registration for

about 1 minute.

At the corded phone base:

3. Press and hold the button for at least 10 seconds until Register is dis-

played.

4. You’ll know your wrist shaker is registered and ready to use when the regis-

tration light unit is a steady green (i.e. it isn’t flashing).

Note: the registration light will flash green and red if your wrist shaker either

isn’t registered or is out of range.

Important: you will only need to register your wrist shaker if it has become

de-registered from the telephone or if you need to register a new wrist

shaker.

104

USING YOUR WRIST SHAKER