User guide
Helpline 0844 800 6503 (See page 108 for costs and hours of operation)
10 0
Us i n g y o U r w r i s t s h A k e r
Register your wrist shaker
Important: you will only need to register your wrist shaker if it has become
de-registered from the telephone or if you need to register a new
wrist shaker.
At the wrist shaker:
1. Turn on the wrist shaker by pressing and holding the
button for about
ve seconds.
2. Press and hold the
button again for about 12 seconds, until the
registrationlightashesgreenquickly.Thewristshakerwillbein
registration for about 1 minute.
At the corded phone base:
3. Press and hold the
button for at least 10 seconds until Register
is displayed.
Note: if you can’t see the registration key
, see the At a glance fold-out
page for the corded phone base at the beginning of this guide.
4. You’ll know your wrist shaker is registered and ready to use when the
registrationlightunitisasteadygreen(i.e.itisn’tashing).
Note: the registration light will ash green and red if your wrist shaker
either isn’t registered or is out of range.