User guide

Helpline 0844 800 6503 (See page 108 for costs and hours of operation)
98
Us i n g y o U r w r i s t s h A k e r
Delete your personal SOS message
1. When your message is played back to you (as in step 4 on the previous
page), press and hold the
button.
The pre-recorded emergency message will now be used.
Activating an emergency call
When you activate an emergency call from your wrist shaker, the PowerTel 680
telephone will go to handsfree mode and will beep for 15 seconds.
You will then hear as each of the emergency numbers you have stored under
the M1, M2 and M3 buttons (see page 94) are dialled automatically, one after
the other, with intervals of approximately 60 seconds.
The person answering the emergency call will hear the SOS message. When
they press the 0 button on their keypad, they will be able to talk to you via the
handsfree on your PowerTel 680 telephone for 3 minutes.
During the last 10 seconds of this 3 minute call you will hear a warning beep
that the call will be disconnected.
If no numbers have been stored under the
, or keys on your
PowerTel 680 then you will just hear a long continuous tone after the beep tone
for 15 seconds and no numbers will be dialled.
If only 1 or 2 numbers have been stored under the
, or keys, then
the numbers that have been stored will be dialled.