Operation Manual

Helpline 0844 800 6503 (See page 108 for costs and hours of operation)

Make a conference call using the cordless handset

1. During your external call, press and hold until a short beep is heard,

then enter the internal call number of the handset you want to transfer the

call to e.g. 2 (to call cordless Handset 2 – if you have more than one cordless

handset on the system) or 0 (to call the corded phone).

2. To accept the call on the receiving handset, press

3. Once the call has been received on the other handset that you’ve dialled, activate

your conference call by pressing

and then releasing the button.

4. You can put the external call on hold by pressing

5. The conference call will end when you press

You only need to register a handset if it has become de-registered from the

base or if you’ve purchased a new handset separately.

Important: make sure any handset you’re registering is fully charged before

you try to register it.

At the cordless handset:

1. Press and hold

for approx 10 seconds until the display shows Press and

hold Page key.

MAKING AND RECEIVING CALLS

9483 PowerTel 680 UG [4].indd 33 12.05.10 14:27