User guide

1-866-AMPLICOM (267-5426)
7
Getting Started — Included Equipment
Set up
1. Connect the corded phone base
i. Plug the power adapter into the back of the corded phone base and the other
end into a wall socket. Turn the power on.
ii. Plug the telephone cable into the back of the corded phone base and the
other end into the phone wall jack.
iii. Plug one end of the handset cable into the handset and the other end into
the side of the base.
If you have purchased an optional shaker (PTV100), plug it into the VIB jack on the back of
the phone. (sold seperately). For servicing or replacement, you can purchase a suitable
shaker with model no. PTV100 through a service center or retailer.
GETTING STARTED
Important: Use only Power supply model S008CU1200067 supplied by Ten
Pao Industrial Co., Ltd. for Base unit.
• 1 Corded Phone Base, Handset and
Answering Machine
• 1 Cordless Handset
• 1 Battery Cover
• 1 Charger Base (For Cordless Handset)
• 2 Power Adapters
• 1 Telephone Cable
• 1 Rechargeable AAA 2.4V 750mAh NiMH
Battery Pack
Power
wall socket