User guide

Service Center

USE ON A PRIVATE BRANCH EXCHANGE

4. Choose the desired recall timing setting (Short or Long) using or

and press .

Insert a dialing pause

Insert a pause before the dial tone if the system requires an outside line which

takes awhile to connect.

To insert a dialing pause using your corded phone, enter the number to reach

the outside line and then press

. A P on your display will show dialing

pause is active.

To insert a dialing pause using your cordless handset, enter the number to

reach the outside line and then press

for two seconds. A P on the display

will show dialing pause is active.

Note: A dialing pause can be used with a phone number in the phone book.

Set the dial mode

There is a choice of two dialing modes: tone and pulse. The default setting is

TONE and this is the correct setting for use within the United States.

To change dial mode using the corded phone

1. Press , then scroll using or to highlight Settings . Press .

2. Scroll using

or to highlight Dial Mode and press .

USE ON A PRIVATE BRANCH EXCHANGE