Operation Manual

Helpline 0844 800 6503 (See page 94 for costs and hours of operation)

Transfer an external call internally

1. During your external call, press and hold either (corded phone) or

(cordless handset) until a short beep is heard, then enter the internal

call number of the handset you want to transfer the call to e.g. 1 (to call the

cordless phone) or 0 (to call the corded phone).

2. To accept the call on the receiving handset, press

Note: if no one picks up the call you’re trying to transfer, you can take the

call back on your phone by pressing

INT

or .

Make a conference call using the corded phone

It’s easy to hold a conference call between one external and two

internal callers.

1. During your external call, press and hold

until a short beep is heard, then

enter the internal call number of the handset you want to transfer the call to

e.g. 1 (to call cordless Handset 1).

2. To accept the call on the receiveing handset, press

3. Once the call has been received on the other handset that you’ve dialled,

activate your conference call by pressing and holding

for 2 seconds.

4. You can put the external call on hold by pressing

5. The conference call will end when you put the handset back in its cradle.

MAKING AND RECEIVING CALLS

9483 PowerTel 580 Combo UG [2].indd 28 12.05.10 14:08