User guide

Service Center
32
USE ON A PRIVATE BRANCH EXCHANGE
Note: A dialing pause can be used with a phone number in the phone book.
Set the dial mode
There is a choice of two dialing modes: tone and pulse. The default setting is
TONE and this is the correct setting for use within the United States.
To change dial mode using the corded phone
1. Press , then scroll using or to highlight Settings and press
.
2. Scroll using
or to highlight Dial Mode and press .
3. The current dial mode setting (e.g. Tone) will be displayed.
4. Choose the desired dial mode setting (Tone or Pulse) using
or
and press
.