User guide

Helpline 0844 800 6503 (See page 54 for costs and hours of operation)

USE ON A PRIVATE BRANCH EXCHANGE

Use on a private branch exchange

If your phone’s on an exchange (e.g. you need to dial 9 to get an outside line),

you can transfer calls and use call back by using the R button. You’ll need to

check your private exchange manual to nd out which timing to use for your

exchange. You can choose two recall timings: 100ms (Short) and 300ms (Long).

To set the recall time

1. Open your menu by pressing , then scroll using or until

you highlight Settings and press

2. Scroll using

or until you highlight Recall and press .

3. You’ll see the current recall timing setting (e.g. Short).

4. Choose the recall timing setting you want (Short or Long) using or

and press .

Insert a dialling pause

If you have to dial a number for an outside line and it takes a while to connect,

you can insert a pause so you don’t have to wait to hear the dialling tone.

To insert a dialling pause, simply enter the number you usually dial for an

outside line and then press

. A P on your display will show dialling pause

is active.