User guide

Helpline 0844 800 6503 (See page 56 for costs and hours of operation)
52
Us e o n a p r i v a t e b r a n C h e x C h a n G e
Use on a private branch exchange
If your phone’s on an exchange (e.g. you need to dial 9 to get an outside line),
you can transfer calls and use call back by using the R button. You’ll need to
check your private exchange manual to nd out which timing to use for your
exchange. You can choose two recall timings: 100ms (Short) and 300ms (Long).
To set the recall time
1. Open your menu by pressing , then scroll using or until you
highlight Base settings and press
.
2. Scroll using
or until you highlight Recall and press .
3. You’ll see the current recall timing setting (e.g. Short).
4. Choose the recall timing setting you want (Short or Long) using
or
and press .
Insert a dialling pause
If you have to dial a number for an outside line and it takes a while to connect,
you can insert a pause so you don’t have to wait to hear the dialling tone.
To insert a dialling pause, simply enter the number you usually dial for an
outside line and then press
for two seconds. A P on your display will show
dialling pause is active.