Operation Manual
Helpline 0844 800 6503 (See page 56 for costs and hours of operation)
9
GETTING STARTED
Set up your phone system in four simple steps
1 Connect your base
i. Plug the power adapter into the socket marked on the back of your
phone base and the other end into the mains power wall socket and switch
the power on.
ii. Plug the telephone cable into the socket marked
on the back of your
phone base but don’t plug the other end into the phone wall socket yet.
Important: use only the power adapters, telephone line cord and batteries
supplied with your PowerTel 500 or 502 otherwise your phone may not work.
Mains power
wall socket
4PDLFUGPS7JCSBUF
1BE157
available as
an accessory
9483 PowerTel 500 UG [3].indd 9 12.05.10 11:31