User and Installation Guide iFinit y TM Digital Wireless Indoor / Outdoor Speaker R
Contents: Unpacking ....................................................................................... 1 Connecting power ........................................................................... 1 Selecting the audio channel ........................................................... 3 Turning on speaker power .............................................................. 4 Pairing the speaker and transmitter ................................................ 5 Setting the speaker volume and treble ..
User and Installation Guide R Unpacking: Check that this package contains: One speaker, one AC adapter (wallwart) Important Note: In order to operate your wireless speaker, you need an Amphony iFinity audio transmitter (sold separately). If you have purchased a full set, the transmitter is already part of the set and is packaged separately. Please refer to the transmitter user guide for operation instructions.
User and Installation Guide R Network DC 36V Mono Left Treble TM iFinit y Right Volume Pairing Off On AC adapter DC 36 V Power outlet Page 2 Connecting power
User and Installation Guide R Network DC 36V Mono Left Treble TM iFinit y Right Volume Pairing Off On Channel-select switch Step 2 Selecting the audio channel Slide the audio-channel switch to the audio channel which you want the speaker to receive. You can either receive the left audio channel, the right channel or a mix between both channels (mono).
User and Installation Guide Network status light R TM iFinit y Network DC 36V Mono Left Treble Right Volume Pairing Off On Turn to minimum Volume control On/Off switch Step 3 Turning on speaker power Turn the speaker volume control to the minimum position. Next, slide the on/off switch into the “On“ position. The network status light should start flashing.
User and Installation Guide Network status light R Network DC 36V Mono Left Treble TM iFinit y Right Volume Pairing Off On Pairing button Step 4 Pairing the speaker and transmitter To receive audio from the transmitter, set the transmitter into pairing mode by pushing the transmitter pairing button. Then, push the pairing button of the speaker within 5 minutes.
User and Installation Guide R Network DC 36V Mono Left Treble Treble control TM iFinit y Right Volume Pairing Off On Volume control Step 5 Setting the speaker volume and treble Now slowly increase the volume control. Use the treble control to adjust the treble of your speaker. Please follow the instructions in the transmitter user guide for adjusting the transmitter properly to your audio source in order to maximize the dynamic range of your speaker.
User and Installation Guide R Troubleshooting Please check the network status light of the speaker and then choose from the following problems: Problem Possible Cause Solution No Sound - Network AC adapter not Check AC adapter for status light is OFF plugged in properly proper fit Speaker not switched on No Sound - Network No wireless signal status light is FLASHING Speaker not paired with transmitter Slide the speaker on/off switch to the “On“ setting Check if the transmitter is active Pair the speak
User and Installation Guide R Technical Specifications Amplifier: Bi-amplification: two separate Class-D amplifiers Amplifier Power: 150W peak, 80W rms Drivers: 5" woofer, 1" tweeter Crossover: Active Frequency response (-6 dB): 60 Hz - 18 kHz Amplifier distortion (THD): 0.06% @ 50 Watts Power efficiency: 91% Max. number of speakers per transmitter: 4 Size: 8.5" (H) x 8.5" (W) x 8.3" (D) Weight: 4.
User and Installation Guide IMPORTANT SAFETY INFORMATION R ATTENTION! READ THESE SAFETY INSTRUCTIONS CAREFULLY AND HEED ALL WARNINGS IN THIS MANUAL. POWER SOURCE To avoid product malfunction, and to protect against electric shock, fire or personal injury, please observe the following: • This product has been designed to work with 120-volt AC current using the supplied AC adapters.
User and Installation Guide CARE • Do not insert or drop anything into the speaker through the air vent as this could cause serious damage, possibly resulting in fire. • Do not place any object containing water or other liquids on this product. • Do not remove the cabinet. Touching parts inside the cabinet could result in electric shock and damage to the product. NON-USE PERIODS • When the product is not being used for a long period of time, unplug the AC adapter from the mains outlet.
Limited warranty WHAT YOUR WARRANTY COVERS This warranty extends only to the original user of the equipment (“you”, ”your”) and is limited to the purchase price of each part. Amphony and its affiliated companies (”we”, ”our”, ”us”) warrant this Wireless Speaker against defects in materials or workmanship as follows.
This warranty does not cover equipment sold AS IS or WITH ALL FAULTS, equipment removal or reinstallation, shipping damage if the equipment was not packed and shipped in the manner we prescribe, nor equipment purchased, serviced, or operated outside the contiguous United States of America. LEGAL LIMITATIONS REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE REMEDY.
Copyright (C) 2011 Amphony. All rights reserved. The information contained herein is subject to change without notice. Revisions may be issued to advise of such changes and/or additions. All product names, trade names, or corporate names mentioned in this document are acknowledged to be the proprietary property of the registered owners. FCC ID: PMJRX1 This device complies with part 15 of the FCC Rules.
