Brochure

M I C R O - D
TEL: [phone] FAX: [phone] NA TOLL FREE 1-866-816-6540 E-MAIL: [e-mail]
47
F I L T E R E D
.050" contact spacing
INCHES (MM)
Series M13
Connector Series
M13 = Filtered micro-d
Connector Size (number of contacts)
09, 15, 21, 25, 31 and 37
Connector Type
P = Plug (pin)
S = Receptacle (socket)
Termination Type
1 = vertical PCB "BS"
2 = vertical PCB "C6"
4 = right angle PCB "CBR"
5 = solid wire straight
6 = stranded wire
Wire / Lead Length (inches)
1 = .109 +/- .015
2 = .140 +/- .015
3 = .172 +/- .015
4 = .250 +/- .015
For Termination Type 6 (inches +1.00/-0.00):
A = 18.00 per M22759/11-26 (mil-std-681, system 1)
B = 36.00 per M22759/11-26 (mil-std-681, system 1)
C = 72.00 per M22759/11-26 (mil-std-681, system 1)
M13 21 P 1 2 P T C 1 1 - 000
Deviation
XXX (000 is standard part)
Plating
1 = Electroless Nickel
2 = Tin
3 = Cadmium (Clear Chromate)
4 = Gold
5 = Zn Ni
Filter Value ( pF +100%/-0%)
A = 200
B = 400
C = 800
1 = 1000
2 = 2000
4 = 4000
8 = 8000
T = 10,000
H = 16,000
0 = MIXED CAP
Filter Type
P = Pi-Filter
C = C-Filter
0 = non-filtered equivalent part
Insert Option
T = Threaded Insert (PCB terminations only)
Omit if not used
Mounting Hardware
A = .093" diameter mounting hole
B = .125" diameter mounting hole
L = Jackpost (loose)
P = Jackpost (fixed)
D
escription: metal shell size 21 receptacle, nickel finish, 18" stranded wires
per M22759/11, jackposts only, C-filter value 1000 pF (no deviations)
Example:
M13-21S6APC11-000
FEATURES
Amphenol Canada's M13 connector series is a range of filtered
MIL-DTL-83513 Micro-D products for military and aerospace
applications.These extremely small filter connectors employ
monolithic planar capacitors in a rugged, high density package
ideally suited for applications where space and weight is
restricted. Available in a vaiety of filter types and mechanical
configurations including wired harnesses and PCB terminations.
The M13 series are fully intermateable with all standard
MIL-DTL-83513 connectors and meet the applicable
performance and environmental requirements.
MATERIALS AND FINISHES
Connector Shell: Aluminum Alloy
Insulator: Polyphenyl Sulfide (PPS)
Seals: Silicone Rubber or Equivalent
Pin Contact: Beryllium Copper with 50 microinches gold over nickel plating
Socket Contact: Copper alloy with 50 microinches gold over nickel plating
Hardware: 300 series stainless steel
PCB Terminals: Gold plated copper alloy, solder dipped
Capacitors: Planar ceramic array
Inductors: Ferrite
EMI Ground Spring: Beryllium Copper
Encapsulant: Thermally conductive epoxy
QUALITY CONFORMANCE INSPECTION
Series M13 connectors have been extensively qualified per the requirements
of MIL-DTL-83513. All products shipped have the following inspection tests:
• 100% visual and mechanical inspections
• 100% capacitance, DWV, insulation resistance and dissipation
factor testing
• Sample insertion loss testing (AQL 1.0%)
For high reliability applications, the following inspection tests or certifications
are also available:
• Thermal shock • Elevated temperature voltage conditioning
• Elevated temperature insulation resistance and capacitance
• Outgassing per JSC-SPR-0022 for space-borne applications
• Baseline and single lot date code manufacturing
• Other tests as required (consult the factory)
Amphenol
®
Canada