Datasheet

Cabling instructions for shielded contacts
ASSEMBLY INSTRUCTIONS
10
Straight crimp shielded contacts:
Right angle crimp shielded contacts:
Solder straight shielded contacts:
Solder right angle shielded contacts:
inner solder contact
outer crimp contact
inner solder contact
outer crimp contact
soft solder
coaxial shell
outer ring
outer ring
braided shield
inner sleeve
soft solder
coaxial shell
outer ring
outer ring
solder
braided shield
inner sleeve
crimp
3.20
soft solder
coaxial shell
outer ring
outer ring
inner sleeve
crimp
3.20
Assembly method
- Slide the outer ring over the cable jacket. Trim the cable
according to the recommended dimensions.
- Insert the cable dielectric and the center conductor inside
the inner sleeve.
- Solder the central conductor to the shielded center
contacts.
- Slide the outer ring towards the inner sleeve ans recover
the braid.
- Using crimp hand tool equipped with the appropriate dies,
crimp in the area defined.
soft solder cap into shell after cable
assembly on 90˚ type coaxes
solder
soft solder
coaxial shell
outer ring
outer ring
inner sleeve
soft solder cap into shell after cable
assembly on 90˚ type coaxes
Assembly method
- Slide the outer ring over the cable jacket. Trim the cable
according to the recommended dimensions.
- Insert the cable dielectric and the center conductor inside
the inner sleeve.
- Solder the central conductor to the shielded center
contacts.
- Slide the outer ring towards the inner sleeve ans recover
the braid.
- Solder by introducing metal through the outer ring hole.