Datasheet

ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd Telephone [phone] Fax [phone]
www.amphenolaudio.com
94
1/4” PHONE PLUGS
The Amphenol T series SwitchPlug uses a unique 360 degree precision
sliding helical spring contact design to quietly and accurately switch the
signal circuit safely to ground during instrument changes under load,
thereby avoiding annoying thumps, pops and squeals. The sliding ring
contact self-cleans every time the plug is connected preventing excessive
build up of oxidization and contamination. Activation is directly off the
jacks full front face assuring a positive reference point every time, and as it
works instantaneously on the main circuits there is no need for the use of
magnets or other elaborate switching mechanisms.
WARNING!
For use with
instrument (guitar)
applications only.
US Patent No.8,162,697
T-SERIES SWITCHPLUG
Part Number Breakdown: Page 97
Specifications: Page 98
PRODUCT - FIGURE DRAWING Dimensions in mm (inches) DESCRIPTION VARIATIONS PART NUMBER
1/4” (6.35mmø)
Switch Phone plug,
Jaws cable clamp,
Thermoplastic
backshell,
Satin finish
Standard TM1P
Gold Plated Contacts TM1P-AU
Large Cable Clamp TM1PJ
Bulk Pack TM1P BULK
1/4” (6.35mmø)
Switch Phone plug,
Jaws cable clamp,
Thermoplastic
backshell,
Black finish
Standard TM1PB
Gold Plated Contacts TM1PB-AU
Large Cable Clamp TM1PBJ
Bulk Pack TM1PB BULK
1/4” (6.35mmø)
Switch Phone plug,
Right angle,
Jaws cable clamp*,
Thermoplastic
backshell,
Satin Finish
Standard TM1RJ*
Gold Plated Contacts TM1RJ-AU*
Bulk Pack TM1RJ BULK*
1/4” (6.35mmø)
Switch Phone plug,
Right angle,
Jaws cable clamp*,
Thermoplastic
backshell,
Black Finish
Standard TM1RBJ*
Gold Plated Contacts TM1RBJ-AU*
Bulk Pack TM1RBJ BULK*
*NOTE: Refer to page 98 for Jaws cable clamp specifications applicable to right angle connectors.