Datasheet

ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd Telephone [phone] Fax [phone]
www.amphenolaudio.com
88
BNC 75 RF CONNECTORS
ASSEMBLY A
ASSEMBLY B
BNC 75 RF ASSEMBLY INSTRUCTIONS
STEP 1. All parts of the connector are shown. A crimp tool is necessary to
complete the connection.
STEP 2. Strip the cable inner conductor, dielectric, braid, and jacket as per
“RECOMMENDED CABLE STRIPPING DIM’S” in catalogue.
STEP 3. Insert inner conductor into the CONTACT PIN, crimp it with the crimp
tool as shown. Then slide the FERRULE onto cable.
STEP 4. Insert the MAIN BODY into braid and dielectric.
STEP 5. Slide the FERRULE over braid, crimp it with the crimp tool as shown.
STEP 1. All parts of the connector are shown. A crimp tool is necessary to
complete the connection.
STEP 2. Strip the inner conductor, dielectric, and jacket as per “RECOMMENDED
CABLE STRIPPING DIM’S” in catalogue.
STEP 3. Slide the FERRULE on to cable, then fold back braid wire and slide the
INSULATOR on to dielectric as shown.
STEP 4. Insert inner conductor into the CONTACT PIN, crimp it with crimp tool
as shown.
STEP 5. Push cable and parts into the MAIN BODY until it stops. Then slide the
FERRULE over braid wire and against the MAIN BODY, crimp it with the
crimp tool as shown.
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5