Datasheet

ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd Telephone [phone] Fax [phone]
www.amphenolaudio.com
58
EP / AP / SP / HP SERIES
SP LOUDSPEAKER CONNECTORS
PI 1070
ASSEMBLY
INSTRUCTIONS
SP SERIES CABLE CONNECTOR
Slide the nut onto the cable
Strip the cable and twist the conductors. Thread the nut onto the shell to activate the
cable clamp and close the connector assembly.
Install the cable clamp, flush to the insert making
sure to align the slot as shown in the picture.
Orientate the insert and cable clamp as shown
then push all together into the shell.
2
8
.
0
1
0
.
0
2.5 MAX
Insert the conductors into the rear of contacts
on the insert. Tighten the screws to 0.35Nm
(3.0 lb-in) using a flat screwdriver with tip
width of 2.5mm max.
1
2 6
4
5
3
Rev 1 - 07/2014