Datasheet

ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd Telephone [phone] Fax [phone]
www.amphenolaudio.com
113
1/4” PHONE PLUGS
1/4” JACKS TECHNICAL DATA
Rev 4 - 05/2014
MUSICIAN / OEM RANGE
VALUE
GENERAL
CHARACTERISTICS
Number of Contacts 2 Pole (Mono)
3 Pole Tip Ring Sleeve (Stereo)
Termination Solder, PCB or Combo
Flammability rating of insulating plastics UL94V-0
Solderability, complies with IEC 68-2-20
Environmental Complies with EU RoHS 2 Directive 2011/65/EU
ELECTRICAL
CHARACTERISTICS
Current Carrying Capacity 10A (Depends on Mating Connector and Cable)
Typical Contact Resistance ≤10mΩ
Insulation resistance (initial)
After Damp Heat Test
>2GΩ
≥10³ Meg Ω
Rated Voltage
Test Voltage AC RMS: Dielectric Strength
34V
500V
CLIMATIC
CHARACTERISTICS
Protection Class IP40
Operating Temperature -25ºC to +70ºC (-13ºF to 158ºF)
MECHANICAL
CHARACTERISTICS
Insertion and Withdrawal Force ≥10N - ≤30N
Mating Cycles Min. of 1000 cycles without any physical damage
Weight
- Straight
- Right Angle
18g (0.039lb)
25g (0.055lb)
MATERIALS
Connector Shell Material Nylon PA66 30% Glass Filled
Insulators UL94 V-0 PBT Resin or Modified PPE Resin and fibreglass laminate
Metal Nut Brass
Plastic Nut Nylon PA66 30% Glass Filled
Washer Fiber / Brass / Nylon PA66 30% Glass Filled
Contact Plating Tin - 4µm Min. over 2µm Min.Cu (Copper)
Silver - 0.3µm Min. over 2µm Min.Cu (Copper)
Nickel - 2µm Min. over 2µm Min.Cu (Copper)
Gold Flash - 0.05µm Min. over 2µm Min.Cu (Copper)
Contacts Brass / Sn (Tin) over Cu (Copper)
1
Approximate weight only, does not include packaging. Please contact us for exact weight for shipping purposes.
1/4” PHONE JACKS