Datasheet

ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd Telephone [phone] Fax [phone]
www.amphenolaudio.com
112
1/4” PHONE PLUGS
1/4” PLUGS TECHNICAL DATA
MUSICIAN / OEM RANGE
VALUE
GENERAL
CHARACTERISTICS
Number of Contacts 2 Pole (Mono)
3 Pole Tip Ring Sleeve (Stereo)
Termination Solder
Max. Wire Gauge - Stranded Wire 2 Pole (Mono): AWG 16˜1.5mm
2
3 Pole (Stereo): AWG 18˜1mm
2
Flammability rating of insulating plastics UL94V-0
Solderability, complies with IEC 68-2-20
Environmental Complies with EU RoHS 2 Directive 2011/65/EU
ELECTRICAL
CHARACTERISTICS
Current Carrying Capacity 10A (Depends on Mating Connector and Cable)
Typical Contact Resistance Depends on Mating Connector
Insulation resistance (initial)
After Damp Heat Test
>2GΩ
≥1GΩ
Dielectric Withstand Voltage 2 Pole : 1.5 kV dc
3 Pole : 1 kV dc
CLIMATIC
CHARACTERISTICS
Protection Class IP40
Operating Temperature -25ºC to +70ºC (-13ºF to 158ºF)
MECHANICAL
CHARACTERISTICS
Insertion and Withdrawal Force ≥10N - ≤30N
Mating Cycles Min. of 1000 cycles without any physical damage
Cable O.D.
- M Series
- M Series II
3mm to 6.5mm (0.118” to 0.256”)
6.5mm to 8mm (0.256” to 0.315”)
MATERIALS
Connector Shell Material Diecast Zinc Alloy EZDA No.3
Connector Shell Finish Satin Nickel or Black Polyester
Insulators UL94 V-0 PBT Resin or Modified PPE Resin and fibreglass laminate
Cable Bushing Santoprene
Contact Plating Brass / Ni over Cu (Copper)
1)
Approximate weight only, does not include packaging. Please contact us for exact weight for shipping purposes.
Rev 4 - 05/2014