Datasheet

ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd Telephone [phone] Fax [phone]
www.amphenolaudio.com
98
1/4” PHONE PLUGS
7.5mm to 10.5mm
(0.295” to 0.413”)
NA
NA
Flammability rating of insulating plastics
Solderability, complies with
UL94V-0
IEC 68-2-20
Environmental
Complies with EU RoHS 2 Directive 2011/65/EU
3 Pole Tip Ring Sleeve (Stereo)
Termination
Max. Wire Gauge - Stranded Wire
Solder
2 Pole (Mono): AWG 16
˜
1.5mm
3 Pole (Stereo): AWG 18
˜
1mm
2
2
Current Carrying Capacity
Typical Contact Resistance
10A (Depends on Mating Connector and Cable)
Depends on Mating Connector
Insulation resistance (initial)
After Damp Heat Test
>2GΩ
≥1GΩ
Dielectric Withstand Voltage 2 Pole : 1.5 kV dc
3 Pole : 1 kV dc
ELECTRICAL
CHARACTERISTICS
Protection Class IP40
Operating Temperature -25°C to +75°C (-13°F to + 167°F)
CLIMATIC
CHARACTERISTICS
Insertion and Withdrawal Force
≥10N - ≤30N
Weight - Thermoplastic Backshell 28g (0.061lb)
Weight - Metal Backshell 35g (0.077lb)
Typical Cable Retenton Force
Mechanical Operations
22kg to 44kg (50lb to 100lb) - Dependent on cable material and diameter.
1000
Cable O.D. - Standard Jaw
MECHANICAL
CHARACTERISTICS
Cable O.D. - Large Jaw
Cable O.D. - Jumbo
3mm to 6mm
(0.118” to 0.236”)
3mm to 5.5mm
(0.118” to 0.216”)
6mm to 7mm
(0.236” to 0.275”)
5.5mm to 6.5mm
(0.216” to 0.255”)
NA NA
1)
1)
1/4” PHONE PLUG TECHNICAL DATA
Number of Contacts
GENERAL
CHARACTERISTICS
Straight Right Angle Jumbo
VALUE
Cable Clamp
Cable Bushing
Contacts / Plating Brass /Ni or Au over 2µm Ni
Santoprene
UL94 V-0 PBT Modified PPO Resin - Black
MATERIALS
Connector Shell Material
Shell Finish
Insulators
Boot / Backshell
Diecast Zinc Alloy EZDA No.3
Satin Nickel or Black Polyester
UL94 V-0 PBT Resin or Modified PPE Resin - Black
UL94 V-0 PBT Resin or Modified PPE Resin - Black or Metal CuZn
39
Pb
3
Approximate weight only, does not include packaging. Please contact us for exact weight for shipping purposes.
1)
Rev 5 - 03/2013
STANDARD DATA