Datasheet

ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd Telephone [phone] Fax [phone]
www.amphenolaudio.com
109
Environmental Complies with RoHS Directive 2002/95/EC
Cable Bushing
Contacts / Plating (Plugs)
Santoprene
PLUG AND JACKS TECHNICAL DATA
Approximate weight only, does not include packaging. Please contact us for exact weight for shipping purposes.
Connector Shell Material (Jacks)
Connector Shell Finish
Insulators
MATERIALS
UL94 V-0 PBT Modified PPO Resin - Black
Satin Nickel, Nickel or Black Polyester
UL94 V-0 PBT Resin or Modified PPE Resin and fibreglass laminate
Current Carrying Capacity
Typical Contact Resistance
10A (Depends on Mating Connector and Cable)
Depends on Mating Connector
Insulation resistance (initial)
After Damp Heat Test
>2G
≥1G
Dielectric Withstand Voltage 2 Pole : 1.5 kV dc
3 Pole : 1 kV dc
Flammability rating of insulating plastics
Solderability, complies with
UL94V-0
IEC 68-2-20
Nunber of Contacts 2 Pole (Mono)
3 Pole Tip Ring Sleeve (Stereo)
Termination
Max. Wire Gauge - Stranded Wire
Solder, PCB or Combo
2 Pole (Mono): AWG 16
˜
1.5mm
3 Pole (Stereo): AWG 18
˜
1mm
GENERAL
CHARACTERISTICS
VALUE
ELECTRICAL
CHARACTERISTICS
Protection Class IP40
Operating Temperature -25°C to +75°C (-13°F to + 167°F)
CLIMATIC
CHARACTERISTICS
Insertion and Withdrawal Force
≥10N - ≤30N
Cable O.D. (Plugs)
MECHANICAL
CHARACTERISTICS
6mm (0.236”)
2
2
1)
Rev 2 - 12/2009
Brass / Ni over Cu (Copper)
Brass / Sn (Tin) over Cu (Copper)
Contacts / Plating (Jacks)
Connector Shell Material (Plugs)
Diecast Zinc Alloy EZDA No.3
MUSICIAN / OEM RANGE
PHONE JACKS
MUSICIAN / OEM RANGE