Instructions

Suitable for model: AMPFIBIAN MINI
USING THE AMPFIBIAN:
1. With nothing plugged in, connect
Ampfibian plug (1) directly into power
supply (wall) socket and switch power
supply ON.
2. Switch Ampfibian ON (2). If unit trips,
unplug it and contact us. DO NOT USE or
continue with next step.
3. Press test button labelled “T” (3).
If switch (2) trips OFF continue to step 4.
If switch (2) DOES NOT trip when test
button pressed, unplug Ampfibian and
contact us. DO NOT use Ampfibian or
continue to step 4.
4. Connect extension cord or operating
device to Ampfibian’s socket (4). Avoid
any strain on the lead.
6. Switch Ampfibian to ON position (2).
IF AMPFIBIAN TRIPS IN SERVICE:
First rule out that the Ampfibian is at fault by
performing the above test procedure.
Ampfibian will trip due to overload or an earth
leakage fault. If you are unsure of the cause,
or you believe there is an earth leakage fault,
turn off all power and contact a licensed
electrician.
If you believe there is an overload, switch off
or unplug some of the appliances and reset
the Ampfibian.
Electricity can be dangerous! RCDs (Residual
Current Devices) are not a substitute for
basic electrical safety precautions. RCDs are
additional protection and will not prevent
shock, but will minimise the effect. Do not
use this device if it fails to operate correctly
in accordance with these instructions.
Ampfibian is rated 240 Volts with a
maximum current rating of 10 Amperes (A).
Do not try to open or repair the Ampfibian
yourself. No user-serviceable parts are
inside. Test the Ampfibian at least once every
month as mentioned in step 3. This device
will only protect against faults to earth
through the body, but not against active to
neutral faults.
This device must be connected DIRECTLY to
an outlet socket. It must not be connected via
cord extension sets.
To achieve the Ampfibian MINI’s ingress
protection rating of IP-33 (water spray up to
60 degrees from vertical), it must sit on a
hard floor with the RCD/MCB facing
downwards and the markings “THIS WAY UP”
facing upwards. The MINI is intended to be
used indoors or undercover.
OPERATING TEMPERATURES 2˚C TO 40˚C.
DO NOT EXPOSE TO PETROL, OIL,
SOLVENTS, POOL CHEMICALS, ETC.
DO NOT USE IN HAZARDOUS LOCATIONS!
DO NOT USE IF DAMAGED!
DO NOT DISASSEMBLE!
INGRESS PROTECTED TO IP-33,
RECOMMENDED FOR INDOOR USE.
DO NOT SUBMERGE IN WATER!
THIS PRODUCT IS NOT INTENDED FOR
PERMANENT INSTALLATION.
STORE IN A DRY PLACE OUT OF
DIRECT SUNLIGHT.
TO BE USED WITH 10A (2
400 WATT)
MAXIMUM LOAD.
INSTRUCTIONS
ADAPT TO YOUR
SURROUNDINGS
[e-mail]
www.ampfibian.com.au
Freecall: 1800-FIBIAN
(1800 342-426)
No. DESCRIPTION
1 POWER PLUG
2 RCD/MCB ON/OFF SWITCH
3 RCD/MCB TEST BUTTON
4 SOCKET FOR DEVICE
RCD = Residual Current Device
MCB = Miniature Circuit Breaker
1789-INSTRUCT-MINI-H1
Every Ampfibian product is thoroughly inspected and tested before leaving our
factory. Ampfibian Pty. Ltd. limits this warranty against defective workmanship
and faulty materials under normal use for twentyfour (24) months from date of
purchase (proof of date of purchase must be provided) and undertakes at its
option to repair or replace each product or part thereof on condition that:
• The product has not been subject to misuse, neglect, accidents or alterations;
• The unit has been used and maintained as per the instructions.
Ampfibian Pty. Ltd. is not liable for any consequential damage to either people,
work or facilities from using the Ampfibian.
Please ensure Ampfibian is actually faulty before returning it, by testing it on a
different power circuit and with a different appliance. Please see the “Return &
Refund Policy” page on our website or contact us for details. All shipping costs
are the responsibility of the customer.
Please staple your purchase receipt (or a copy) to this document. You will be
asked to provide a filled-out copy of this form and proof-of-purchase in the
event of a warranty claim.
Please keep warranty information and instructions with you.
Only send your warranty information to Ampfibian if requested.
RCD/MCB may vary from illustration.
All RCD/MCBs have an up/down toggle switch where
UP is ON; and a test push-button marked “T”.
DATE OF PURCHASE:
PURCHASED FROM:
PURCHASER’S NAME:
CONTACT INFORMATION:
LIKE US ON FACEBOOK!
1
2
3
4
OPERATING POSITION
THIS WAY UP!
2 3
TM
ON
OFF