Specifications

SECTION IV
4.5.4 925
Function Kevs
Function commands may also be transmitted by pressing a function key (Fn) or SHIFT/Fn.
See Table 4-2 for a list of codes transmitted.
Video Attributes
A video attribute or combination thereof is denoted by a three-character escape
sequence:
ESC G n
where "n" is the value associated with the attribute or combination. The value of "n"
associated with an attribute is given in Table 4-7.
Clearing Data
There are several ways to clear data from the screen and/or host's memory. Table 4-8 lists
different ways to clear data in this emulation.
Setting the Time
The time of day may be set by entering the sequence
ESC space 1 N HH MM
where N = meridiem, A=AM, P=PM
HH =hour, two digits: 01 to 12
MM =minutes two digits: 00 to 59
For example, to set the time to 1:15 PM, enter
ESC space 1 P 01 15
Remember, 1:15 PM is displayed as 13-45.
Host Request Time-of-Dav
The host may request the time-of-day by sending to the terminal the sequence
ESC space 2
The terminal responds
N HH MM CR (carriage return)
4-12