Specifications

4.5.2 920
Function Keys
Function commands may also be transmitted by pressing a function key (Fn) or SHIFT/Fn.
See Table 4-2 for a list of codes transmitted.
Video Attributes
Video attributes for this emulation are given in Table 4-4.
Table 4-4. Video Attributes for TV920
Attribute Sequence
Start blank ESC_
Start blink ESC
A
End blink/blank ESC q
Start Reverse Video ESC j
End Reverse Video ESC k
Start Underline ESC I
End Underline ESC m
4.5.3 924/914
Function Kevs
Function commands may also be transmitted by pressing a function key (Fn) or SHIFT/Fn.
See Table 4-2 for a list of codes transmitted.
Programming the Function Kevs
You can change the sequence transmitted by a function key in normal emulation.
To program a function key, enter the sequence
ESC p1 p2 message CTRL/Y
where p1 denotes the function key to be programmed (Table 4-5),
p2 denotes where the code will be transmitted (Table 4-6),
message denotes the desired function, and
CTRL/Y is the mandatory termination character.
4-8