Specifications

SECTION IV
4.2 ADDS
4.2.1 Viewpoint A1 and A2
Function Keys
Pressing a function key transmits a two-charactersequence:
Lead-in Code ASCII Code
STX m
where "m" is the value associated with the function key. The value of "m" for each key is
given in Table 4-3.
Table 4-3. Viewpoint Function Key Codes
Function Kev STX... IfSHIFT/Fn. STX...
F1 1 !
F2 2
F3 3 #
F4 4 $
F5 5 %
F6 6 &
F7 7
F8 8 (
F9 9 )
F10 :
F11 ; +
F12 <
F13
F14 >
F15 ? /
F16 @ 0
4.3 Ampex
4.3.1 210
Function Commands
In this emulation, a function command may be transmitted by pressing FUNCT/another-
key. The sequence transmitted is
SOH (CTRL/A) ASCII code of key CR
Function commands may also be transmitted by pressing a function key. See Table 4-2 for
a list of codes transmitted.
4-4