Specifications

SECTION III
FOR EXAMPLE, to reverse the effect of the SHIFT/LEFT and SHIFT/RIGHT arrow keys
1. To initiate programming for all SHIFT/Keys, enter
ESC ] 1
2. Then enter without spaces
d £ 1 SHIFT/KEY
RS NUL NUL (HOME)
LF NUL NUL (DOWN)
ESC j NUL (UP)
FF NUL NUL (LEFT)
BS NUL NUL (RIGHT)
3. Continue entering values for the remaining keys in the same way, in the order
given in Table 3-17
3.10 SETTING THE TIME
The time of day may be set in one of two ways, by going into Set-Up (Line 3) or by entering
the following sequence
ESC .C1 N HH MM
where N = meridiem A = AM, P = PM
HH = hour, two digits: 01 to 12
MM = minutes two digits: 00 to 59
NOTE: Time will display in 24 hour form: 1:15 PM is displayed as 13-15.
3.10.1 Host Request for Time-of-Day
The host may request the time-of-day by sending to the terminal the sequence
ESC . C 2
The terminal responds
N HH MM CR
where N, HH, and MM are the meridiem, hour, and minutes, as above.
3-42