Specifications

OPERATION
Note also: The default Insert-Character is space. To change the Insert-Character to some
other character, enter the sequence
ESC e
where x
denotes the desired (alphabet or numeric) Insert-Character.
Key Code If Setting is
CTRL/ERASE LINE ESC t PROT OFF
PROTON
CTRL/ERASE PAGE ESC y PROT OFF
PROTON
Effect
Erases all characters from cursor
position to end of line. Null
characters replace erased
characters.
Erases all unprotected characters
from cursor position to end of
line. Null characters replace
erased characters.
Erases all characters from cursor
position to end of page. Null
characters replace erased
characters.
Erases all unprotected characters
from cursor position to end of
page. Null characters replace
erased characters.
LINE DELETE
ESCR PROT OFF
PROTON
LINE INSERT ESC E PROT OFF
PROTON
Deletes data in the line on which
cursor is positioned. Remaining
data moves up one line; Insert-
Characters replace the last line.
Cursor moves to column 1 on
same line.
Command ignored.
Beginning with line on which
cursor is located, moves data
down one line; Insert-Characters
fill the line on which cursor is
positioned (data on last line is
lost); moves cursor to column 1
of line.
Command ignored.
3-29