Specifications

SETTING UP
2.2.5 Status Line 5
Field
HOST XMIT = 9600
RECEIVE -XMIT
BIT 8=0
Other
19200
38400
50
75
110
135
150
300
600
1200
1800
2400
3600
4800
7200
19200
38400
50
75
110
135
150
300
600
1200
1800
2400
3600
4800
7200
9600
BIT8 = 1
7 BITS
Description
Sets the rate (bits/second) of transmitting data from
terminal to host.
Sets the rate (bits/second) of transmitting data from host
by terminal. XMIT sets receive rate to send rate.
Sets the data word configuration (the number of bits
when transmitting data between host and terminal) and
the contents of Bit 8. 7 BITS means there is no eighth
bit.
STOP 1 STOP 2 Sets the stop bit configuration.
PAR OFF PAR ODD Sets the type of parity applicable to each data word
PAR EVEN transmitted.
NO PARCHK PAR CHECK Set PAR CHECK if the terminal requires a parity check
for compatibility with host.
DTR ONLY XON ONLY Sets the transmission protocol:
DTR & XON DTR ONLY Data Terminal Ready only
NONE XON ONLY XON/XOFF only
DTR & XON Data Terminal Ready and XON/XOFF
NONE Neither DTR nor XON is used.
2-11