Specifications

2.2.4 Set-UpLine4
Field Other Description
DUPE LOCE Sets whether or not certain edit key codes are
transmitted to host. If DUPE, codes are transmitted. If
LOCE, codes are not transmitted. Applies only if
terminal is set to CONV and FDX (Line 1).
KLIKON KLIKOFF Sets effect of typing a key. If KLIK ON, electronically
synthesized "click" accompanies typing a key. If KLIK
OFF, no sound accompanies typing a key.
RPT ON RPT OFF Sets effect of holding down a key. If RPT ON, held key
will repeat. If RPT OFF, holding a key is same as typing
key once: only one character results. NOTE: The
following keys never repeat:
BREAK FUNCT
CAPS LOCK LOG ESC / ESC
CLEAR/HOME RESET
CTRL SHIFT
BELL OFF BELL ON Sets effect of cursor approaching right margin. If BELL
ON, bell sounds when cursor reaches column 72 if 80
COL, column 120 if 132 COL
LWCS UPCS Sets the effect of pressing an alphabet key at power-up.
If UPCS, it produces an upper case character (CAPS
appears on the Status Line). If LWCS, it produces a
lower-case character.
DOWN
A
/V (Only if emulation = TV924) Sets code transmitted by
DOWN
A
/J pressing DOWN arrow:
If values is Down Arrow generates
DOWN
A
/V CTRL7V
DOWN
A
/J CTRL7J
CR=CR CR=CRLF Sets terminal's response to a typed or received carriage
return. If CR=CR, moves cursor to column 1 of the same
line; if CR=CRLF, moves cursor to column 1 of the next
line.
KB ON KB OFF Used to lock/unlock keyboard. KB OFF locks the
keyboard; i.e., prevents data entry via keyboard.
EMBED NONEMB Sets the type of video attributes. If EMBED, a video
attribute is assigned to a range and occupies a column
position. If NONEMB, a video attribute is assigned on
character-by-character basis. See Section III for more
information.
TIME:08-00 Sets time of day (in 24-hour time). At power-up, set to
08-00. To set to another time, use arrow key to move
cursor to desired location (hour, minute), then use the
spacebar to scroll to the desired setting.
2-10