Specifications

ManualsBrandsAmpex ManualsMusical equipment230 plus

SETTING

UP

SECTION

II

SETTING

UP

INTRODUCTION

The

Ampex

230

plus terminal

is

designed

to

operate

in a

variety

of

ways, attached

to a

variety

of

equipment.

In

order

to

make sure that

the

terminal

will

work properly with your

particular configuration

of

equipment,

you

must first

set it up;

i.e.,

you

must customize

it to

work

with your equipment.

This

section explains

the

options

available

in

Set-up mode,

how to

enter

and

exit Set-up

mode,

how to

change settings,

and how to

save

the

changes.

2.1

ENTERING SET-UP MODE

To

enter Set-Up

mode,

press

SHIFT/NO

SCROLL

=

mode,

current parameter values

are

displayed.

SET UP.

When

you

first enter Set-Up

Entering Set-Up

signals

(XOFF

or DTR

Low)

the

host

to

stop transmission. Exiting Set-Up

signals (XOFF

or DTR

High)

the

terminal

to

resume transmission.

2.1.1 Set-Up Lines

There

are

eight lines

of

parameters

for

customizing operation

of the

terminal.

Each

line

displays

as the

26th (bottom)

line

on the

screen. Each option

is

contained

in a

"field",

displayed

in

half-intensity, reverse video (dark letters against

light

background).

The

cursor

appears

as a

flashing

block

during

set-up.

To

move

the

cursor between

fields

on a

set-up

line,

use the

appropriate arrow key:

Arrow

Kev

LEFT

RIGHT

Moves

cursor

to

Preceding

field,

if

any

Following field,

if

any

To

view another set-up line, press

the

appropriate arrow key:

Arrow

Kev

UP

DOWN

Moves

cursor

to

Preceding

line,

if any

Following

line,

if any

2-1