Specifications

ManualsBrandsAmpex ManualsMusical equipment230 plus

SECTION

I

1.3

ON/OFF Switch

The

ON/OFF (power) switch

is a

rocker-type switch located

to the

right rear

of the

unit.

1.3.1

Power

On

Procedures

When

you

turn

on the

terminal,

it

performs

a

self-test

to

make sure

it is

working properly.

This self-test operation checks

the

following areas/functions:

CMOS

RAM (a

check

sum of the

terminal's set-up information)

DATA

RAM

DISPLAY

RAM

ROM

VISUAL

ATTRIBUTES (displays

the

test

pattern*)

NOTE:

the

results

of the

self-test

do not

depend

on

whether

or not the

terminal

is

connected

to a

computer and/or

printer;

i.e.,

you can

check

the

terminal

is

working

properly without

first

connecting

it in

your system.

To

turn

on the

terminal:

1.

Plug

the

power cord into

the

proper outlet

or

receptacle.

Make

sure

all

interface cables

are

connected properly.

2.

Set the

on/off

switch

to ON

(rear

"swing"

down).

IF

THE

SELF-TEST FINDS

NO

PROBLEMS,

the

cursor

will

appear

in the

HOME position (the upper left corner

of the

screen).

The

terminal

is

ready

for

use.

*

The

test

pattern shows

all

character

sets,

the

different

video attributes

of

characters,

the

version

number

of the

terminal's

firmware,

and

manufacturer

copyright information.

Ordinarily,

the

test pattern

is not

displayed during

the

power-on self-test.

1-10