Specifications

ManualsBrandsAmpex ManualsMusical equipment230 plus

Replacing

the

Yellow

Plunger

1.

Using

needle-nose

pliers,

remove

the

plunger from

the

keycap. Avoid damaging

the

plunger

when separating

it

from

the

keycap.

2.

Position

the

plunger

over

the

keyswitch

so

that

the bar on the

underside

of the

plunger runs north/south, relative

to the

keyboard.

3.

Carefully lower

the

plunger,

making

sure

the bar

separates

the two

contacts.

CAUTION

Inserting

the

yellow

plunger

improperly

may

bend

or

break

the

contacts

of

the

key.

4.

With

the

contacts separated

by the bar on the

plunger,

press

the

plunger firmly into

position.

5.

Check

the

keyswitch

to

make sure

it

operates freely.

6209

Figure

lns-2.

Replacing Plunger

Replacing Keycaps

Position

the

replacement keycap over

the

correct

key

location.

After

doublechecking

the

keycap

to be

sure

it is

properly centered, depress

the

keycap until

it is

securely seated

on

the

plunger.

Illustrations

in

Appendix

B

identify

the

correct

key

location

for

each character set.

lnsert-2