User Guide

Ampex 1308910-01 5-35
ACL Utilities acl_setparam_library
AutoStore A value of 1 sets the Auto Store configuration parameter to on and
a value of
0 sets it to off.
When the Auto Store configuration parameter is set to off, the
initiator must use the acl_move_tape or acl_move_volume utility
to remove a tape cartridge from the tape drive (after the drive ejects
the tape cartridge in response to a tape drive Unload command).
When the Auto Store configuration parameter is set to on, the ACL
automatically returns any tape cartridge ejected by the drive to the
location from which it was loaded (or, if this is unknown, to an
empty storage bin).
AutoImport A value of
1 sets the Auto Import configuration parameter to on
and a value of
0 sets it to off (DST 812).
The ACL detects the presence of a tape cartridge wen it is inserted
into an IMEX bin. When the Auto Import configuration parameter
is set to on, the ACL automatically transfers the cartridge to the next
available storage bin.
When the Auto Import configuration parameter is set to off, this
functionality is suppressed and the initiator must use the
acl_move_tape or acl_move_volume utility to transfer the
cartridge to a storage bin (or tape drive).
AutoAuditOverride A value of
1 sets the Auto Audit Override configuration parameter
to on and a value of
0 sets it to off.
The ACL has an internal database which it keeps up to date. When
powered on with a tape cartridge in the drive, however, the ACL
cannot read the barcode ID of that cartridge until it is unloaded from
the drive.
When the Auto Audit Override configuration parameter is set to off,
the ACL automatically executes a barcode read when it does not
have a barcode ID stored for the tape cartridge it unloads from the
drive. When the Auto Audit Override configuration parameter is set
to on, this functionality is suppressed.
BarcodeRequired A value of
1 sets the Barcode Required configuration parameter to
on and a value of
0 sets it to off.
When the Barcode Required configuration parameter is set to on,
the ACL limits movement of a tape cartridge that does not have a
readable barcode ID:
• A DST 412 ACL will not move the tape cartridge to a drive.