User Guide

Ampex 1308910-01 A-29
Returned Sense Data CHS Failure, Error, and Warning Codes
5012 (0x1394) Failed to detect pre-sequenced cartridge for unload
5013 (0x1395) Illegal bin number
5014 (0x1396) Illegal choice, select: 0 for no or 1 for yes
5015 (0x1397) Illegal cycle count value
5016 (0x1398) Illegal lift value
5017 (0x1399) Illegal out-arm parameter
5018 (0x139A) In-arm calibration data write checksum error
5019 (0x139B) Out-arm calibration data write checksum error
5020 (0x139C) Out-arm failed to start pushing cartridge for unload
5021 (0x139D) Out-arm lifter solenoid protector timed out
5022 (0x139E) Power off timed out waiting for idle
5023 (0x139F) Power off timed out waiting for park
5024 (0x13A0) Power off timed out waiting for small unload
5025 (0x13A1) Servo safety checks are disabled by jumper J26 out
Table A-4. CHS Failure, Error, and Warning Codes (Continued)
CHS Code Description