User Guide

A-22 Ampex 1308910-01
Model No.
Running Head
CHS Failure, Error, and Warning Codes Returned Sense Data
1018 (0x3FA) Cartridge did not enter load port for loading
1019 (0x3FB) Cartridge did not enter load port for unloading
1020 (0x3FC) Cartridge did not exit drive elevator for an unload cartridge abort
1021 (0x3FD) Cartridge did not exit load port for loading
1022 (0x3FE) Cartridge did not exit load port for unloading
1023 (0x3FF) Cartridge did not reach elevator home for loading
1024 (0x400) Cartridge Did Not Return To Drive For An Unload Cartridge Abort
1025 (0x401) Drive elevator roller mda fuse [F1] is open
1026 (0x402) Elevator calibration data write checksum error
1027 (0x403) Elevator calibration sequencer timed out
1028 (0x404) Elevator cannot be moved for an initialization
1029 (0x405) Elevator failed to enable position mode during calibration
1030 (0x406) Elevator failed to enable position mode during calibration
1031 (0x407) Elevator failed to move for a barcode scan
1032 (0x408) Elevator failed to move to barcode scan start
1033 (0x409) Elevator failed to park after an unload cartridge abort
1034 (0x40A) Elevator failed to position after calibration
1035 (0x40B) Elevator Failed To Position For An Audit
1036 (0x40C) Elevator failed to position for calibration
1037 (0x40D) Elevator failed to position for loading
1038 (0x40E) Elevator failed to position for parking
1039 (0x40F) Elevator failed to position for unloading re-try
1040 (0x410) Elevator failed to position for unloading
1041 (0x411) Elevator failed to safety position after audit
1042 (0x412) Elevator failed to safety position after initialization
1043 (0x413) Elevator failed to safety position after loading
1044 (0x414) Elevator Failed to safety position after unloading
1045 (0x415) Elevator failed to step position for calibration
1046 (0x416) Elevator lower over-travel sensor tripped
Table A-4. CHS Failure, Error, and Warning Codes (Continued)
CHS Code Description