User Guide
Ampex 1308910-01 A-19
Returned Sense Data CHS Failure, Error, and Warning Codes
616 (0x268) Z-axis hook cannot be moved
617 (0x269) Z-axis velocity servo error
618 (0x26A) X-axis servo switch is off
619 (0x26B) Y-axis servo switch is off
620 (0x26C) Z-axis servo switch is off
621 (0x26D) MDA motor relay power is off
622 (0x26E) Y-axis system cannot be moved
623 (0x26F) X-axis tachometer cable disconnected
624 (0x270) Y-axis tachometer cable disconnected
625 (0x271) Z-axis tachometer cable disconnected
626 (0x272) CHS MDA power is off
627 (0x273) XYZ I/F Board is missing
628 (0x274) Barcode Reader board is missing
630 (0x275) X-axis cannot move for a reset
631 (0x276) X-motor drive failed for reset
632 (0x277) Right vane detector failed on reset
633 (0x278) Center vane detector failed on reset
634 (0x279) X-axis velocity servo failed
635 (0x27A) Y-axis cannot move for a reset
636 (0x27B) Y-motor drive failed for reset
637 (0x27C) Bottom vane detector failed on reset
638 (0x27D) Middle vane detector failed on reset
639 (0x27E) Y-axis velocity servo failed
640 (0x280) Z-axis cannot move for a reset
641 (0x281) Z-motor drive failed for reset
642 (0x282) Z-vane detector failed on reset
643 (0x283) Z-axis velocity servo failed
644 (0x284) Rear door is open
645 (0x285) Front door is open
Table A-4. CHS Failure, Error, and Warning Codes (Continued)
CHS Code Description