User Guide

A-12 Ampex 1308910-01
Model No.
Running Head
Vendor-Specific ACL Condition Codes Returned Sense Data
0x05 0x20 0x00 0x29
Illegal Request
AC_INVALID_OPCODE
Illegal Request, Unrecognized
Opcode in SCSI Command
The SCSI command contained an
invalid opcode.
An invalid SCSI command was
sent to the ACL by the host
system. Verify that:
• the ACL software and device
driver are installed properly.
• the SCSI host adapter is
functioning correctly.
• the cabling between the host
system and the ACL is not
damaged.
0x05 0x21 0x01 0x06
Illegal Request
AC_ELEM_RANGE
Illegal Request, Element Address
Out of Range
The Move command cannot be
completed with the addresses(es)
supplied in the SCSI command.
Read Element Status and verify
that the addresses are valid and
the move is permitted.
0x05 0x21 0x01 0x2D
Illegal Request
AC_UNKNOWN_VOLUME
Illegal Request, Unknown Barcode
The ACL does not contain the cartridge
you specified.
Load the cartridge into the ACL
or specify a different cartridge.
0x05 0x21 0x01 0x32
Illegal Request
AC_NO_BARCODE
Illegal Request, Barcode
Unreadable
The ACL cannot read the barcode label
on the cartridge.
Replace the barcode label.
Table A-3. Vendor-Specific ACL Condition Codes (Continued)
ACL
Sense ASC ASCQ Condition
Key Code
Error Enumeration,
String, and Condition
Recovery Procedure