User Guide

A-8 Ampex 1308910-01
Model No.
Running Head
Vendor-Specific ACL Condition Codes Returned Sense Data
0x02 0x04 0x03 0x2F
Not Ready
AC_NOT_READY_MAN_MODE
Not Ready, Manual Mode Selected
(412)
The ACL can be operated from its front
panel independently from the host.
While it is in manual mode, it will not
execute SCSI commands.
Change mode to on-line using
front-panel message screen
buttons.
0x02 0x04 0x03 0x30
Not Ready
AC_NOT_READY_SEQ_MODE
Not Ready, Sequential Mode
Selected
(412)
The ACL can be operated from its front
panel independently from the host.
While it is in sequential mode, it will
not execute SCSI commands.
0x02 0x04 0x03 0x31
Not Ready
AC_NOT_READY_OFFLINE
Not Ready, Offline Mode Selected
(412)
The ACL can be operated from its front
panel independently from the host.
While it is off-line, it will not execute
SCSI commands.
0x02 0x04 0x03 0x46
AC_ROBOT_BUSY
The ACL is not ready.
Retry
0x02 0x53 0x02 0x2B
Not Ready
AC_DRIVE_NOT_READY_TO_UNLOAD
Not Ready, Tape Drive Unable to
Unload Cartridge
The tape drive has an enable bit that
must be set before a cartridge may be
unloaded.
Make sure that the drive is on-
line and the cartridge to be
unloaded is in the drive load port
(i.e., ejected by the drive).
0x02 0x53 0x02 0x44
Not Ready
AC_ROBOT_TXP_FRONT_LOADED
Not Ready, Cartridge in Tape
Drive was Front Loaded
(812)
A cartridge in a tape drive was loaded
from the front of the unit (not by the
CHS).
Manually unload the cartridge
from the front of the tape drive.
Table A-3. Vendor-Specific ACL Condition Codes (Continued)
ACL
Sense ASC ASCQ Condition
Key Code
Error Enumeration,
String, and Condition
Recovery Procedure