User Guide

Ampex 1308910-01 A-3
Returned Sense Data Error/Event Parameter Identification Codes
0x27
Assigning tape cartridge to empty
storage bin
Bin number
0x28 Loading tape cartridge to default drive Drive number
0x29 Self injecting unload command N/A
0x2A Mode select software error N/A
0x2B Mode select data error N/A
0x2C CHS mode set to manual N/A
0x2D CHS mode set to sequential loop N/A
0x2E Barcode task PSOS queue error Error number
0x2F Barcode task could not initialize timer N/A
0x30 Barcode command timeout N/A
0x31 Request sense data
1
st
= sense key
2
nd
= ASC value
3
rd
= ASCQ value
0x32
Panic disconnect to kernel process
(SCSI)
N/A
0x33
SCSI Attention request in kernel
process
N/A
0x34 CHS control machine entered idle state N/A
0x35 CHS control machine auditing bin N/A
0x36
Initialize Element Range SCSI
command
1
st
= number or elements
2
nd
= address of first element
0x37
Initialize Element Status SCSI
command
N/A
0x38 CHS mode set to sequential non-loop N/A
0x39 SCSI command failure SCSI status code
0x3A CHS tally data not being updated N/A
0x3B New CHS status from tally SCSI status code
0x3C DST ACL model is neither 410 nor 810 N/A
0x3D New cartridge in IMEX slot N/A
0x3E
Tape drive task could not initialize
timer
N/A
Table A-1. Error/Event Parameter Identification Code Descriptions (Continued)
Code Description Integer Interpretation