User Guide

A-2 Ampex 1308910-01
Model No.
Running Head
Error/Event Parameter Identification Codes Returned Sense Data
0x0F CHS door opened N/A
0x10 CHS door closed N/A
0x11 CHS command sent Command opcode
0x12 CHS command complete N/A
0x13 Unable to send CHS command Command opcode
0x14 CHS command complete with warning Command opcode
0x15 CHS command failure Command opcode
0x16 CHS command timeout Command opcode
0x17 CHS response Response code
0x18
Barcode command sent to barcode
reader
Command opcode
0x19 Barcode data sent to CHS
1
st
= status
2
nd
= code
0x1A Unable to send barcode data to CHS N/A
0x1B
Internal command processor (ICP)
queue timeout
ICP state
0x1C ICP message queue error Software trace
0x1D ICP received bad message Message size
0x1E ICP received a new message ICP state
0x1F Launching new state machine N/A
0x20 New SCSI command received N/A
0x21 PSOS queue error Software trace
0x22 Move Volume SCSI command
1
st
= tape cartridge barcode ID
2
nd
= source element address
3
rd
= destination element address
4
th
= transport element address
0x23 Error getting bin data from database Error code
0x24 Error getting drive data from database Error code
0x25 Error getting tally data from database Error code
0x26
Returning tape cartridge to source
storage bin
Bin number
Table A-1. Error/Event Parameter Identification Code Descriptions (Continued)
Code Description Integer Interpretation