User Guide

Ampex 1308904-X4 Preliminary Draft A-19
ACL Application Programmer’s Guide CHS Failure, Error, and Warning Codes
1018d (3FAh) Cartridge did not enter load port for loading
1019d (3FBh) Cartridge did not enter load port for unloading
1020d (3FCh) Cartridge did not exit drive elevator for an unload cartridge abort
1021d (3FDh) Cartridge did not exit load port for loading
1022d (3FEh) Cartridge did not exit load port for unloading
1023d (3FFh) Cartridge did not reach elevator home for loading
1024d (400h) Cartridge Did Not Return To Drive For An Unload Cartridge Abort
1025d (401h) Drive elevator roller mda fuse [F1] is open
1026d (402h) Elevator calibration data write checksum error
1027d (403h) Elevator calibration sequencer timed out
1028d (404h) Elevator cannot be moved for an initialization
1029d (405h) Elevator failed to enable position mode during calibration
1030d (406h) Elevator failed to enable position mode during calibration
1031d (407h) Elevator failed to move for a barcode scan
1032d (408h) Elevator failed to move to barcode scan start
1033d (409h) Elevator failed to park after an unload cartridge abort
1034d (40Ah) Elevator failed to position after calibration
1035d (40Bh) Elevator Failed To Position For An Audit
1036d (40Ch) Elevator failed to position for calibration
1037d (40Dh) Elevator failed to position for loading
1038d (40Eh) Elevator failed to position for parking
1039d (40Fh) Elevator failed to position for unloading re-try
1040d (410h) Elevator failed to position for unloading
1041d (411h) Elevator failed to safety position after audit
1042d (412h) Elevator failed to safety position after initialization
1043d (413h) Elevator failed to safety position after loading
1044d (414h) Elevator Failed to safety position after unloading
1045d (415h) Elevator failed to step position for calibration
1046d (416h) Elevator lower over-travel sensor tripped
Table A-5. CHS Failure, Error, and Warning Codes (Continued)
CHS Code Description