User Guide

A-14 Preliminary Draft Ampex 1308904-X4
Model No.
Running Head
CHS Failure, Error, and Warning Codes ACL Application Programmer’s Guide
104d (68h) Cannot clear stuck cartridge
CALIBRATION PROCEDURE WARNINGS (8XX)
200d (C8h) Transport depth beyond CHS reach
201d (C9h) Offset write checksum error
202d (CAh) Calibration procedure aborted
203d (CBh) Servos requested to be limp
CHS FAILURE TALLY MESSAGE NUMBERS (8XX)
500d (1F4h) CHS never read command
501d (1F5h) CHS never returned status
PUT PROCEDURE FAULTS (8XX)
510d (1FEh) Bin was not empty on a put
511d (1FFh) Z-motor drive failed on a put
512d (200h) Bin was missed on a put
513d (201h) Jam in a bin on a put
514d (202h) I/O port was missed on a put
515d (203h) Jam in a I/O port on a put
516d (204h) Hit I/O stop arm on a put
517d (205h) Elevator was missed on a put
518d (206h) Jam in an elevator on a put
519d (207h) Cartridge struck loader roller
520d (208h) Failed to recover pushed cartridge
521d (209h) Drive not home to accept a put
522d (20Ah) Y-servo did not lock on a put
523d (20Bh) Z-servo did not lock on a put
524d (20Ch) Z-servo did not move for a put
GET PROCEDURE FAULTS (8XX)
550d (226h) Z-axis already full for a get
551d (227h) Cartridge sensor error on a get
552d (228h) Z-axis vane/cartridge sensor error
Table A-5. CHS Failure, Error, and Warning Codes (Continued)
CHS Code Description