Specifications

TE6000
inputs and data
12 CHANNEL SWITCHING DATA ENCODER
Zone switching from analogue paging mic from distance away may need large multi core cables which may not be
economical and inaccurate due to voltage drop.
TE6000 shall be used to convert analogue zone switching into RS485 data which is known able to travel to a distance of
up to 1000m. It is compatible for any analogue paging desk or customised switching panel. Multiple units of TE6000 can be
combined to form larger size of zone switching.
It is also used to convert unbalanced audio input to balanced line output, which is the preferred way of long distance audio
transmission.
packing information
Features
Specifications
Long distance switching data transmission over RS485 protocol
Converts unbalanced into balanced audio signal for minimal noise
interference in long distance cabling
Expandable and addressable to cater for more than 12 switching data
Priority setting for multi point paging setup
Powering via local 24V adaptor or from rack
Compatible with most analogue paging desk with negative trigger
Modular and can be easily placed near paging console
Operating voltage
Power consumption
Switching inputs
Link / cascade
Max zones
AUDIO
Input impedance
Output impedance
Frequency response
S/N ratio
Max audio input
Max signal output
DATA
Data protocol
Baud rate
Dimensions (WxHxD)
Weight
24V DC ; 0.5 A
2.4 W / 100 mA
12 switching / 1 priority
15 nos max
Up to 192 zones
Mic : 600 Ohm / Line : 10 K Ohm
600 Ohm balanced
70 ~ 15 KHz
> 60 dB ( @ 1 KHz )
Mic ( -60 dB ) / Line ( -30 dB )
+ 4 dB
RS485
19.2 K bps
218 x 35 x 127 mm
500 gms
Qty per carton : 5 unit
W x H x D : 225 x 175 x 185 mm
Weight : 2.7 kg
Schematic Diagram
Apart from application in paging system, TE6000 can be applied in
sending switching signals by door contacts, alarm sensors or any
application that needs to be monitored from a distance away.
PAGING MIC
REPEAT - PAGING MIC
normal
input
priority 2
input
priority 1
input
SPEAKER ZONE
SELECTOR
TD6800
If PD2400 paging mic is used,
TE6000 shall be excluded
2 pr scr
audio + data
2 pr scr 2 pr scr
to mixer audio
input : mic/line
multiply TD6800 to
zone qty requirement
remote triggering port
multi core cable
DIP switch setting
for module address
<1000m
in rack
24V DC
Connection with TD6800.
Please add additional TE6000 if required
TE6000
2008 - all rights reserved by amperes electronics sdn bhd
www.ampereselectronics.com
the emerging preference
page 6