amperes electronics sdn bhd Co No : 509025-X CONTENTS Amperes Electronics is now in its 10th year since its inception in 1999 in Puchong, Malaysia and has been a name synonymous with Public Address System. Product offer ... Be it large or small scale installation, Amperes has something to offer with the best available solution to meet the demanding requirements and cost factors. We build to cater the needs with contemporary design and stress highly on the quality. Continuous development ...
pmx Introducing the new Amperes PMX System, a software based product which is a sort of integration of various hardware components such as programmable timer, chime & siren tone generator, message recorder / player, CD player, music bank and paging station. With PMX System, a significant amount is saved from investing in hardwares, less maintenance and moreover, it is easily upgraded from time to time, making it a product that never obsolete.
PM1000 PM1060 PM1120 Desktop Paging Microphone pm1000 analogue series 6 Ch Desktop Paging Microphone 12 Ch Desktop Paging Microphone PM1000 series are available in three variants and had been serving many installations faithfully since its creation. They are avaialble as simple paging mic with chime to those with 6 or 12 zone selections. They are most suitable for simple and small size installations of less than 12 zones in total.
PD2400 pd2000 series 24 Zone Digital Paging Microphone PD2400 is suitable for mid size installations of up to 24 zones. It can be located away in a distance of around 500m which utilizes RS485 for data communication whereas the audio by using balanced line signal. Features The unit has individual key for zone selection with 4 groups and ALL CALL. 4 tone chime is incorporated and shall be activated prior and after a paging.
PD2800 pD2000 series Digital Paging Microphone PD2800 shall be suitable for large setup, offering wide range of features with affordable pricing. Up to 108 zones can be stored in the paging desk's memory and total capacity of zoning shall be up to 256 zones. 9 groupings, each with 12 zones can be programmed for paging convenience. Multi point paging, connected in series using EX2800 would form a large network of paging points.
EP1200 emergency paging panel EP1200 is an essential paging tool for firemen during emergency, or when direct paging to all zone is required at the equipment rack. It shall allow direct access to the PA system which would bypass incoming BGM or other normal paging in progress. Its built in siren tone generator can be triggered manually via the front panel switch or via external fire sensor or fire switch by providing a close contact to the connector at the back of the unit.
CM1400 chime unit Chime and Siren Tone Generator CM1400 offers 5 chimes and 2 siren tones with selectable balanced and unbalanced line output. Activation of chime shall be from front switches or via remote triggering terminal, enabling the unit to be linked to external sensors or triggering system such as alarm panel, remote mic or emergency switch. Siren has priority over chimes. It is suitable for installation in schools, factories, hazardous areas etc.
data encoder and decoder TE6000 is used to convert analogue zone switching into RS485 data for long distance transmission of up to 1000 m. It shall also convert unbalanced signal to balanced line output which is a preferred way of long distance audio cable run. This eliminates the need of large multicore cables which may not be economical, inaccurate due to cable voltage drop and unwanted noise. Combination of multiple units of TE6000 shall enable large setup to be made.
MX2222 pre-amplifier mixer 12 Input Pre-Amplifier Mixer Features 12 inputs of mic, BGM sources, ext.chime and mixer link Expandable to form more channels for larger setup This compact 1 hu pre-amplifier mixer features 6 mic, 4 BGM sources, chime and external line inputs and is suitable for any application, such as meeting room, lecture theatre, hall of prayer and definitely commercial fixed PA installation. Auto mic muting with adjustable mixing level for mic Ch.1, 2, ext.
DA2208 signal distribution amplifier 2 Input 8 Output Signal Distribution Amplifier DA2208 consists of 2 sets of 1 in 4 out distribution amplifier with option to form 1 in 8 out unit. Each channel shall has its own treble and bass control for better fine tuning the overall installation accordingly to type of speakers used or the acoustic environment of the zone.
MxP2188 matrimix paging system 8 x 8 Matrix Paging Controller Features 8 input and 8 output Matrix controller with inputs of either Mic or BGM or fed from remote source panel Individual channel setup for bass, treble and volume Built in chime with selectable 2 or 4 tone output Built in voice recorder of up to 60 seconds Audio output monitor for every zone Remote triggering port for message and siren mixers / distributions Priority override dry contact port whenever ALL CALL is MxP2188 caters for a more
MxP2188 SYSTEM COMPONENTS 8 / 16 Zone Remote Paging Microphone A dedicated remote paging desk with 8 / 16 channel zone selection, connected directly to MxP2188 c o n t r o l l e r. To a c h i e v e m u l t i p o i n t p a g i n g s e t u p , u s e E X 11 0 2 m i c extender in series connection. RP1104 800 mA Communication RS485 ; 19.
Ma / mb2000 SERIES MIXER AMPLIFIERS MA2060 : 60 W 100V Mixer Amp with 3 Zone Output MA2012 : 120 W 100V Mixer Amp with 3 Zone Output MB2106 : MB2112 : 60 W 100V Basic Mixer Amp 120 W 100V Basic Mixer Amp power amplifiers MA and MB Series of mixer amplifiers are suitable for small installations such as in showroom, small meeting hall, lecture theatre, etc. Both series are available in 60W and 120W 100V lines, featuring 6 mic / line inputs, bass and treble controls.
PA310 : PA320 : PA330 : 10 W 4 Ohm Mini Amplifier 20 W 4 Ohm Mini Amplifier 30 W 100V Line Mini Amplifier Amperes PA310 and 320 are mini amplifiers used to amplify BGM signal to a speaker of 4 or 8 Ohm, such as from TV output to a bathroom speaker in a hotel room. Amperes VC7805 volume controller and VP7810 BGM-Speaker patch panel can be installed if required to allow emergency paging to be announced at the speaker.
power amplifiers pa2000 series power amplifiers PA2120 PA2240 PA2360 PA2480 : : : : 120W 100V 240W 100V 360W 100V 480W 100V Amperes PA series of power amplifiers had been the workhorse of many installations and are available in power ratings of 120W to 480W 70 / 100V line. Various features had been added throughout the years since its inception and these had enhanced their performance and reliability.
PX2100 PX2200 PX2300 PX2400 PX series of power amplifiers are equipped with AFS ( Auto Fault Sensor ) which generate pilot tones internally and automatically diagnose and detect any faulty condition that may occur at the output end. Pilot tones are generated at intervals to avoid straining the power packs, and this shall prolong the life span of the units.
AC3601 6 Duty / 1 Standby Amplifier Changeover Panel manual amplifier changeover Amperes AC3601 is a manual changeover panel for 6 duty with 1 standby amplifier and is required for a standby unit to take over a failed duty amp to ensure uninterrupted and continuous operation of a PA system. More than one AC3601 can be cascaded for a single standby unit to cater for more than 6 duty packs.
AX700 auto amplifier changeover 6 Duty / 1 Standby Amplifier Changeover Panel AX700 is a platform for standby amplifier to take over failed duty unit in an automated changeover setup. Each unit caters for 6 duty and 1 standby amplifier but expandable to larger setup with a single standby power pack. It shall be used with amplifiers with auto fault sensing ( AFS ) such as PX series and whereas normal amplifiers are used, Amperes AS4000 shall be installed at every duty unit.
AX3700 auto amplifier changeover 6 Duty / 1 Standby Auto Amplifier Changeover Panel Amperes AX3700 offers a great flexibility and simplicity in cabling for auto amplifier fault changeover system with its combination of amplifier fault sensor modules and changeover panel in a box. The internally generated Pilot Tone and sensory circuit shall detect any faulty duty amplifier and would initiate a changeover process.
AM6000 amplifier monitoring 6 Ch. Amplifier Monitor Panel AM6000 shall be used to monitor the condition of amplifier outputs of 70 / 100V line at the rack which is equipped with level meter, amplifier output LED and speaker for audio monitoring. It can also be used as a tool to calibrate sound output level of each amplifier from the rack.
6 Ch Speaker Line Surveillance LS4600 Features LS4600 monitors the condition of speaker line for faults such as ground leakage, short circuit and open circuit. It employs impedance measurement method with detection tone, and this would eliminate the use of blocking capacitors and resistors in the speaker network. Upon detection of flaws, it would provide fault alert via LED indications and buzzer.
speaker zone selector 6 Ch Speaker Zone Selector 12 Ch Speaker Zone Selector : ZS5601 : ZS5121 ZS5601 and 5121 are trusted product for speaker zone selection which had been used for nearly a decade. They provide direct zone switching for single source PA setup via front panel switches or through remote port connected to Amperes PM Series paging desk, or through Amperes TD decoders when PD series of paging desks are used.
speaker zone selector ZS5602 6 Ch Uninterrupted Paging Speaker Zone Selector ZS5602 shall be suitable for uninterrupted paging setup, ie. when an announcement to a zone is made, other areas with BGM shall not be interrupted. This shall require two sets of amplifiers connected to the ZS5601, thus the system shall consist of two sources, one being BGM and the other as Paging.
BC9730 power supply and distribution 24V DC Automatic Battery Charger Features BC9730 is a 24V DC current regulated battery charger with 3.3A capacity, suitable for charging batteries of up to 100Ah. Charging method is constant voltage with reducing current.
SQ9715 power supply and distribution When rules of switching On or Off the stack of AV or PA equipments are neglected, it may cause damage to the component of the system, such as speakers, amplifiers or video projectors. Sequential Power Switcher Features 7 channel with 6 A per channel ; total load 15 A maximum SQ9715 offers a solution to the switching sequence by switching on in sequence from channel 1 to 7 and vice versa during shutting down by a push of a switch.
VC7000 / VC7000A / VC8000 VOLUME CONTROLLERS They are suitable for 4 wire system installation with built in emergency overriding relay and overriding LED indicator.
VR7600 SERIES rack mounted zone volume controllers VARIANTS VR7605 - 6 Zone X 50W 100V Line VR7610 - 6 Zone X 100W 100V Line VR7615 - 6 Zone X 150W 100V Line application schematic PA 2120 POWER AMPLIFIERS 120 Watts POWER POWER PA 2120 I PROTECT O SIGNAL -10 dB CLIP SIGNAL -40 dB volume controller / patch VR series is available in three variants with 6 zones at each panel. It shall be mounted at rack to enable volume of each zone to be controlled or set at the control room.
VP7501 : VP7810 : Local Speaker Patch Panel 100V - 8 Ohm Speaker Patch Panel localised speaker patch panel VP7501 shall be used to isolate a group of speakers (meeting room, etc) from central PA system to allow a separate PA amplifier to utilise those local speakers, but shall be overrided by main system in the event a 24V overriding signal is present.
ceiling speakers Dual Cone Speaker ABS Enclosure Dual Cone Speaker Metal Enclosure Co-Axial Speaker ABS Enclosure CS510 : CS610 : CS606 : CS620 : CS840 : 6” 6W 100V Line 6” 20W 100V Line 8” 40W 100V Line speakers 5” 6W 100V Line 6” 6W 100V Line Available in 5” and 6” of driver size complete with matching transformer of three tappings ; 1, 3 or 6W. Back enclosure are supplied as integral part of the speakers made from quality ABS plastic.
surface mount & column Surface Mount Speaker Surface Mount Speaker Column Speaker BS410 : DV410 : CH720 : 20W 100V Line CH730 : 30W 100V Line CH730 : 40W 100V Line 4” 6W 100V Line speakers 4” 10W 100V Line It is constructed with high quality ABS plastic with 4” dual cone speaker driver and multi tapping matching transformer of 1 / 3 / 6 and 10W 100 V line. Suitable for wall and ceiling installation with optional tilt mounting bracket. Available in white colour.
music & array speakers Foreground Music Speaker Foreground Music Speaker Cabinet Array Speaker FS415 : FS630 : FS520 : FS625 : LA4100 : 5” 15W 100V Line 6” 25W 100V Line 4” 120W 100V Line speakers 4” 10W 100V Line 6” 30W 100V Line White and black colour available Only black colour available Only black colour available Available in 4” and 6” of driver size complete with matching transformer and mounting bracket.
horn & projection speakers Horn Speakers with Round Flare Horn Speaker with Rect. Flare Sound Projector HS815 : HS830 : HS820 : HS822 : SP100 : 6” x 8” 15W 100V Line 8” x 11” 20W 100V Line 10W 100V Line speakers 8” 15W 100V Line 12” 30W 100V Line Both models are constructed using rounded aluminum flare of 8” ( HS815 ) and 12” ( HS830 ) with multiple power selection via rotary switch.
enclosures EC7012 : ES7012 : EC9090 : ES9090 : 70 x 120 mm Back enclosure for concealed mounting 70 x 120 mm Back enclosure for surface mounting 86 x 86 mm Back enclosure for concealed mounting 86 x 86 mm Back enclosure for surface mounting All models with 60 mm depth, suitable for volume controllers with auto transformers. Enclosures are optional items and to be ordered separately from volume controllers / patch panels.
