Datasheet
Ampercell GmbH • Frankfurter Landstrasse 68 • 61440 Oberursel -D • www.ampercell.com
EN Portable Rechargeable COB LED Floodlight 10W / 20W
1. Holder
2. Fixing screw
3. Swivelling mounting bracket (u-shaped)
4. Stand
5. Locking screw for stand
6. On/Off switch
7. Charging socket
Technical features
Type:
Rechargeable floodlight 10 watt
Rechargeable floodlight 20 watt
LED:
Epistar
Epistar
Light colour:
cold white
cold white
Luminous flux:
800 lumens
1,600 lumens
Service life:
> 50,000 hours
> 50,000 hours
Beam angle:
up to 120°
up to 120°
Rechargeable battery:
Li-ion 7.4V – 4.4Ah
Li-ion 7.4V – 8.8Ah
Charging time:
5 hours
5 hours
Battery charge indicator:
yes
yes
Burn time:
3 hours
3 hours
Materials:
Aluminium die casting/ ABS plastic
Aluminium die casting/ ABS plastic
IP protection class:
IP 65
IP 65
Measures:
145 x 160 x 240 mm (LxWxH)
215 x 185 x 285 mm (LxWxH)
Net weight:
980 g
1,730 g
Delivery contents
1x rechargeable floodlight; 1x stand with fixing screw; 1x 230V AC mains plug; and 1x 12V DC vehicle charger adaptor.
Charging process
Remove rubber cover from the charging socket at the base of the rechargeable floodlight.
Connect the 230V AC mains plug or the 12 V vehicle charge adaptor with the charging socket, then connect with a power
source. While the battery is charged, a red LED will shine (only in the 230V AC mains plug) and change to green when
charging is completed. It takes five hours until the battery is fully charged.
Safety advice
Never charge battery for more than 24 hours.
Use floodlight only with the supplied charging units.
Do not use any damaged plugs.
Do not open your floodlight. It doesn’t contain any parts that need servicing!
If you don’t use your floodlight, charge battery at least every six months.
Rechargeable batteries don’t go into domestic waste. Please observe legal regulations for proper disposal.
1
2
2
3
4
5
5
6
7