MICRO-VR Quick Start Guide
What’s in the Box MICRO-VR Amplifier, Power Cable, Quick Start Guide.
Front & Rear Panels 1 5 3 2 8 6 4 7 12 11 14 13 3 10 9
Front and Rear Panel Descriptions 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. Input: Connect a passive or active instrument to this Input jack. –15 dB Pad: Reduces input level by 15 dB when connecting an active instrument to the Input jack. Peak LED: Indicates when the input signal is clipping. Gain Knob: Varies the intensity of the signal sent to the preamplifier. EQ Knobs: Boost or cut the level at certain frequencies to enhance the sound.
Technical Specifications MICRO-VR 150W RMS @ 8 200W RMS @ 4 Output Power Rating (5% THD) (5% THD) Signal-to-Noise 72 dB (20 Hz - 20 kHz, unweighted) Maximum Gain 62 dB @ Tone controls centered Power Requirements 100 - 120V AC, 50 - 60 Hz, 150W 220 - 240V AC, 50 - 60 Hz, 150W Size (H x W x D) 7.5 x 12 x 10 in 190 x 305 x 254 mm Weight 9.9 lb 4.5 kg All specifications subject to change WARRANTY AND SUPPORT Visit WWW.AMPEG.COM to... (1) ...identify WARRANTY coverage provided in your local market.
Supplier's Declaration of Conformity 47 CFR § 2.1077 Compliance Information Unique Identifier: Ampeg MICRO-VR Responsible Party - U.S. Contact Information: Yamaha Guitar Group, Inc. 26580 Agoura Road Calabasas, CA 91302-1921 (818) 575-3600 https://ampeg.com/ FCC Compliance Statement: This device complies with Part 15 of the FCC Rules.
