User manual

SVT-7 PRO Bass Guitar Amplifier

SVT-7 PRO Bass Guitar Amplifier SVT-7 PRO Bass Guitar Amplifier

Service Information

f you are having a problem with your SVT-7 PRO, you can go to our website (www.ampeg.com)

and click on Support for service information, or call Technical Support at 1-800-898-3211

Monday-Friday during

normal business hours, PST

, to receive assistance. If you are outside of

the U.S., contact your local distributor for technical support and service.

SVT-7 PRO TECHNICAL SPECIFICATIONS

Output Power Rating 600 watts rms @ 8 ohms, 5% THD

1000 watts rms @ 4 ohms, 5% THD

Signal to Noise Ratio 72 dB (20 Hz–20 kHz, unweighted)

Maximum Gain 72 dB, tone controls centered

Tone Controls Bass: +12/–12 dB @ 40 Hz

Midrange: +10/–20 dB @ 220 Hz, 450 Hz,

800 Hz, 1.6 kHz or 3 kHz

Treble: +15/–20 dB @ 4 kHz

Power Requirements ~100–120 VAC, 50–60 Hz, 1050 W

~200–240 VAC, 50–60 Hz, 1050 W

Size (H x W x D) 4.0 in/102 mm (with feet) x 15.6 in/396 mm

x 11.5 in/292 mm (with feet)

Weight 15.5 lb/7.03 kg (approximately)

The SVT-7 PRO is covered with sheet metal and aluminum, not unlike robots, spaceships and other

cool things. Clean with a dry lint-free cloth.

Never spray cleaning agents on the SVT-7 PRO. Avoid

abrasive cleansers which would damage the finish.

Ampeg continually develops new products and improves upon existing ones. For this reason, the specifications

and information in this manual are subject to change without notice.

“Ampeg” is a registered trademark of LOUD Technologies Inc. All other brand names mentioned are trademarks

or registered trademarks of their respective holders and are hereby acknowledged.

www.ampeg.com

16220 Wood-Red Road NE • Woodinville, WA 98072

Part No. SW0787 Rev. B 09/09