PF-115LF & PF-410HLF Speaker Cabinets Owner’s Manual
PF-115LF / PF-410HLF Speaker Cabinet Important Safety Instructions 1. Read, follow, and keep these instructions. Heed all warnings. 2. This speaker is capable of producing high sound pressure levels that may cause permanent hearing damage. User caution is advised and ear protection is recommended during use. 3. This speaker is designed for use on a sturdy, level surface. Whenever stacking speaker cabinets, do not stack more than two high. 4.
PF-115LF / PF-410HLF Speaker Cabinet Rear Panel Connector Plate PF-115LF PF-410HLF 1 IMPEDANCE: 8 OHMS POWER: 800W RMS HIGH FREQUENCY ATTENUATOR OFF –6 0 2 PF-115LF 1. FULL RANGE INPUTS 1 PF-410HLF 1/4" TS Full Range Input / Output Jacks: The jackplate features two 1/4" jacks wired in parallel, allowing easy daisy-chaining from one speaker to another. Each of the jacks may be used as an input or a through connection.
PF-115LF / PF-410HLF Speaker Cabinet TECHNICAL SPECIFICATIONS Frequency Response (+/–3 dB) 57 Hz – 3.7 kHz [PF-115LF] 55 Hz – 17 kHz [PF-410HLF] Usable Low Frequency (–10 dB) 32 Hz [PF-115LF] 30 Hz [PF-410HLF] Impedance 8 ohms Power Rating 400W rms, 800W peak [PF-115LF] 800W rms, 1600W peak [PF-410HLF] Sensitivity 99.5 dB SPL 1w/1m [PF-115LF] 101.0 dB SPL 1w/1m [PF-410HLF] Maximum SPL 125.5 dB [PF-115LF] 130.
