User Guide

Micro-CL Stack

Service Information

f you are having a problem with the Micro-CL, please visit our website (www.ampeg.com)

and click on Support for service information or call Technical Support at 1-800-898-3211

Monday – Friday during normal business hours, Pacific Time, to receive assistance. If you

are outside of the U.S., contact your local distributor for technical support and service.

MICRO-CL TECHNICAL SPECIFICATIONS

OutputPowerRating  100watts@8ohms

Signal to Noise Ratio 72 dB (20 Hz – 20 kHz, unweighted)

Maximum Gain 59 dB at 1 kHz

Amplifier Inputs 2 x 1/4" jacks [0dB, –15dB]

2 x 1/8" jacks [aux, headphones]

ToneControls  Bass:  +11/–11dB@50Hz 

  Midrange:+11/–11dB@600Hz 

  Treble: +13/–13dB@6kHz

Power Requirements

Japan 100V ~50–60 Hz, 85W

U.S. 120V ~60 Hz, 85W

EU 220–240V ~50–60 Hz, 85W

Amplifier Size (H x W x D) 7 in/178 mm (with feet) x 12.2 in/310 mm

x 10 in/254 mm

Amplifier Weight 13.8 lb / 6.3 kg

Cabinet Frequency Response 57 Hz – 5 kHz

CabinetSensitivity  100dBSPL@1w/1m

Cabinet Input 1 x 1/4" jack

Speaker Specs 2 x 10" LF drivers

Cabinet Size (H x W x D) 13 in/330 mm (with feet) x 24 in/610 mm

x 11 in/279 mm

Cabinet Weight 33.2 lb / 15.1 kg

The Micro-CL is covered with a durable fabric-backed vinyl material. Clean with a dry lint-free cloth.

Never spray cleaning agents onto the stack. Avoid abrasive cleansers which would damage the finish.

Ampeg continually develops new products and improves upon existing ones. For this reason, the specifications

and information in this manual are subject to change without notice.

“Ampeg” is a registered trademark of LOUD Technologies Inc. All other brand names mentioned are trademarks

or registered trademarks of their respective holders and are hereby acknowledged.

www.ampeg.com

16220 Wood-Red Road NE • Woodinville, WA 98072

Part No. SW0920 Rev. B 10/12